i.To prepare for and issue instructions as per scheme of training of a specified unit by interpreting the curricula and its guidelines to facilitate practical preparation;

ii.To participate in delivering instructions to trainees through demonstration in order to impart properly the intended practical skill and attitude;

iii.To guide the safe use of training tools and equipment by performing daily preventive and corrective maintenance to maintain the life span of same; and

iv.To perform any other duties as may be assigned by her/his supervisor.

i.To prepare for and issue instructions as per scheme of training of a specified unit by interpreting the curricula and its guidelines to facilitate practical preparation;

ii.To participate in delivering instructions to trainees through demonstration in order to impart properly the intended practical skill and attitude;

iii.To guide the safe use of training tools and equipment by performing daily preventive and corrective maintenance to maintain the life span of same; and

iv.To perform any other duties as may be assigned by her/his supervisor.

i.To prepare for and issue instructions as per scheme of training of a specified unit by interpreting the curricula and its guidelines to facilitate practical preparation;

ii.To participate in delivering instructions to trainees through demonstration in order to impart properly the intended practical skill and attitude;

iii.To guide the safe use of training tools and equipment by performing daily preventive and corrective maintenance to maintain the life span of same; and

iv.To perform any other duties as may be assigned by her/his supervisor.

i.To drive vehicles towards approved destinations and in accordance with traffic regulations;

ii.To undertake minor mechanical repairs;

iii.To take vehicles due for routine maintenance/repair to the appointed service agent; 

iv.To maintain motor vehicle log books;

v.To make pre–inspection to the assigned vehicle prior travelling and report mechanical damages/defects;

vi.To ensure safety and cleanliness of the vehicle at all times;

vii.To ensure that valid documents and permits are acquired prior commencement of any journey;

viii.To report promptly accidents or incidents involving the vehicles to the relevant authority; and

ix.To perform any other duties as may be assigned by immediate supervisor

i.To perform tallying activities;

ii.To ensure no cargo/goods are taken out of the ports without proper documentation/authority;

iii.To prepare periodic reports and submit to concerned authorities on time;

iv.To supervise yard activities relating to cargo handling activities to ensure safe and efficient loading and delivery operations;

v.To ensure that required and adequate equipment are available for loading and unloading, as well as delivery activities; and

vi.To perform any other related duties as may be assigned time to time by Supervisor.  

i.To perform cleaning of Wheelhouse, accommodation, chipping and painting on main deck

ii.To assist in maintaining rescue boats;

iii.To stand as lookout watch;

iv.To assist in changing  bouys mooring chains of buoys;

v.To assist manual work during hydrographic surveys;

vi.To direct loading and unloading cargo;

vii.To assist to perform lashing and rope works;

viii.To assist in assembling new buoys and towers;

ix.To perform any other related duties as may be assigned time to time by Supervisor

 ITo operate radar and other equipment of the electronic navigation system (ENS);

 IITo keep constant watch of the radar/ system monitor vessel traffic.

 III.To interpret pictures and plot position, directions and other relevant information;

 IV.To communicate appropriate information at the right time to the right Vessel regarding traffic status such as position, speed direction and environmental factors;

 V.To maintain records and evolves shift reports;

 VI.To perform any other duties as assigned from time to time.

i.To work within the daily work schedule;

ii.To maintain tug log book showing Main engines and Auxiliaries  running service hours and movements made by the tug;

iii.To ensure routine maintenance of Machineries are carried as per planned schedule

iv.To perform any other related duties as may be assigned from time to time by Supervisor. 

i.To operate winch, cranes as per approved procedures and policies; 

ii.To provide quality services on plant operation;

iii.To perform gangway activities; 

iv.To operate the equipment (Winch, Folk Lifts, Terminal Tractors and Cranes) as per approved procedures and policies; 

v.To carry out loading, offloading or discharging and delivery of Motor vehicles and other cargo into/from a ship; and

vi.To perform any other related duties as may be assigned time to time by Supervisor.

i.To operate winch, cranes as per approved procedures and policies; 

ii.To provide quality services on plant operation;

iii.To perform gangway activities; 

iv.To operate the equipment (Winch, Folk Lifts, Terminal Tractors and Cranes) as per approved procedures and policies; 

v.To carry out loading, offloading or discharging and delivery of Motor vehicles and other cargo into/from a ship; and

vi.To perform any other related duties as may be assigned time to time by Supervisor. 

i.To assist in preparation of roster and supervises Security guards for general security services, port movement control, and escort;

ii.To protect cargo from malicious damage, theft and pilferage;

iii.To assist the Security officers on day to day duties;

iv.To ensure secure environment at their point of duty; 

v.To supervise security guards; and

vi.To perform any other related duties as may be assigned time to time by Supervisor.  

i.To undertake repair works or fabricate equipment parts scheduled by respective sections for Forklifts and in the Engines Shop;

ii.To overhaul engine of the equipment; 

iii.To prepares equipment to the required Standard;

iv.To carry out maintenance and repair of light equipment, particularly, Cranes, and Forklifts;

v.To carry out preventive maintenance according to schedule;

vi.To carry out scaling of boats;

vii.To carry out maintenance works in the engine shop to ensure that mechanical equipment is in good working condition all the time;

viii.To carry out preventive maintenance for plants, motor vehicles and tractors; and

ix.To perform any other related duties as may be assigned time to time by...

i.To perform all hose handling activities and ensures safety of all equipment;

ii.To operate cargo valve within the oil terminal limits;

iii.To take action on any oil spill and leakage on the water at the jetty as required by environmental control Agencies;

iv.To ensure achievement of set targets for the loading unit;

v.To carry out maintenance of all equipment belonging to the jetty;

vi.To ensure efficient loading and off-loading ; and

vii.To perform any other related duties as may be assigned time to time by Supervisor.

i.To prepare roster and supervises Security Assistants for general security services, port movement control, and escort;

ii.To prevent & protect cargo from malicious damage, theft and pilferage;

iii.To perform patrols on day to day basis;

iv.To apprehend anyone infringing regulations or anyone whom he finds stealing;

v.To maintain self- discipline at work and ensures that staff does not leave their point of duty without being released or without permission;

vi.To supervise security guards and ensures that they provide efficient service; and

vii.To perform any other related duties as may be assigned time to time by Supervisor.

i.To arrange for customs clearance in respect of outgoing coastal vessels and   the foreign going vessel;

ii.To prepare bills for the service rendered which include hire of tugs, pilot boats, patrol boats etc.

iii.To issue of boat licenses appearing within the inner harbor;

iv.To issue Merchants and ship chandlers licenses;

v.To handle marine operation staff matters and supervise the general office administration;

vi.To prepare and administers berth activity records;

vii.To collect cash or cheque and transmit to cashier at the revenue office; and

viii.To perform any other related duties as may be assigned time to time by Supervisor.

i.To pilot Ships and other Vessels with maximum length of 150 mts. for safe berthing & un-berthing within the Port;

ii.To assist commanding the Tugs boats beyond harbor boundaries.

iii.To keep training on safe berthing and unberthing ships/ vessels with length over 150 mts.

iv.To command the Floating Crane and tow for dry docking.

v.To ensure that all outgoing ships have valid outward port clearance.

vi.To ensure Pilot Log sheet and Master Report are accurately filled up for billing purposes; and

vii.To perform any other related duties as assigned from time to time by the Supervisor.

i.To arrange for customs clearance in respect of outgoing coastal vessels and   the foreign going vessel;

ii.To prepare bills for the service rendered which include hire of tugs, pilot boats, patrol boats etc.

iii.To issue of boat licenses appearing within the inner harbor;

iv.To issue Merchants and ship chandlers licenses;

v.To handle marine operation staff matters and supervise the general office administration;

vi.To prepare and administers berth activity records;

vii.To collect cash or cheque and transmit to cashier at the revenue office; and

viii.To perform any other related duties as may be assigned time to time by Supervisor.

i.To assist in recording all data; 

ii.To prepare data base for all data converted in excel sheets; and

iii.To perform any other related duties as may be assigned by immediate supervisor.

i.To provide GIS support in the whole process of data conversion; 

ii.To perform data Quality check of all converted data; 

iii.To perform spatial Data transformations; 

iv.To assist in maintaining data base for statistical purposes; and

v.To perform any other related duties as may be assigned by immediate supervisor.

i.To Scan all town planning drawings & survey maps; 

ii.To Geo-reference town planning drawings & surveying maps; 

iii.To Vectorize town planning drawings with QGIS;

iv.To participate in Parcel identification in unplanned areas; 

v.To prepare maps as needs may arise; and

vi.To perform any other related duties as may be assigned by immediate supervisor

i.To Sort all LD files for data conversion from hardcopy to softcopy; 

ii.To record of data in data conversion exercise; 

iii.To scan all documents in LD files in data conversion exercise; 

iv.To perform Quality Check of all scanned files in data conversion exercise;

v. To prepare data base for scanned files in data conversion exercise; 

vi.To prepare daily progress reports in data conversion exercise; and

vii.To perform any other related duties as may be assigned by immediate supervisor

i.To Sort all LD files for data conversion from hardcopy to softcopy; 

ii.To record data in data conversion exercise; 

iii.To Scan all documents in LD files in data conversion exercise; 

iv.To perform Quality Check of all scanned files in data conversion exercise; 

v.To prepare data base for scanned files in data conversion exercise; 

vi.To prepare daily progress reports in data conversion exercise; and

vii.To perform any other related duties as may be assigned by immediate supervisor

            i.        To converse data of town planning drawings;